ITS

NITESTAR DMI

Complete an average survey using just four keys

GPS ENABLED | RECORDS DISTANCE AS YOU DRIVE

The NiteStar Distance Measuring Instrument (DMI) from MH Corbin is designed to complete an average survey using just four keys. The device records distance for logging points along a given route and will compute linear distances with a high degree of accuracy. It is easy to use and displays measurements right in your vehicle.

Measures distances on highways or guardrails, telephone pole spacing, gas pipelines, E-911 addressing, TV cable length, even the length of crop fields. Can also be used for roadway inventories, traffic studies, cable line mapping, plant engineering, railway length, accident reconstruction or traffic monitoring. Calculate volume amounts and costs for materials like asphalt, concrete and sand. Compute distances and areas using a vehicle’s speed and the distance traveled. Slimline design for easy mounting. Back-lit LCD panel has three brightness adjustments for easy viewing, kph, status, four-digit distance interval, and six-digit distance.

Easy to Use

Simple to install, collect and retrieve data

Accurate Distance Measurements

Records distance and survey coordinates as you drive

Extensive Storage

Extensive internal memory for data storage and export

Features

Thes NiteStar DMI is designed to accurately record distances and survey coordinates as you drive. The device records distance for logging points along a given route and records linear distances with a high degree of accuracy. It is easy to use and displays measurements right in your vehicle. The NiteStar has endless uses when vehicle-obtained distances are needed.

The NiteStar DMI is used in conjunction with a speed sensor mounted on the firewall or under the dashboard. This sensor transfers speed signals to the DMI for measurement and display.

  • Measurements are displayed in real-time
  • Displays distance intervals between point of interest
  • Extensive internal memory for data storage and export
  • Easy to install and use
  • Optional software allows for easy organization, viewing and reporting
  • Inventory data and coordinates are stored in a single file
  • Customizable key definitions for user or application

Where to Buy


Distributor Map HAR
USA

Americas

Canada

Automated Traffic Data Dino Caruso 905-331-2438 dino.caruso@gmail.com http://www.automatedtrafficdata.com
Automated Traffic Data Dino Caruso 905-331-2438 dino.caruso@gmail.com http://www.automatedtrafficdata.com
Automated Traffic Data Dino Caruso 905-331-2438 dino.caruso@gmail.com http://www.automatedtrafficdata.com
Automated Traffic Data Dino Caruso 905-331-2438 dino.caruso@gmail.com http://www.automatedtrafficdata.com
Automated Traffic Data Dino Caruso 905-331-2438 dino.caruso@gmail.com http://www.automatedtrafficdata.com

Latin America

Ecuador
Sistemas Tecnológicos Cia. Ltda.
Diego Alcocer
593 2 6043210
dalcocer@sistemastecnologicos.com.ec
http://sistemastecnologicos.com.ec

Europe

Eastern Europe

Poland
FUSiT SYGNAŁY S.A.
ul. Sygnały 62
Rybnik
Tel. 48324218431
marketing@sygnaly.com.pl
www.sygnaly.com.pl

Southern Europe

Selekta Prima D.O.O Contact: Miroslav Paclik I. Trnava 49 10040 Zagreb, pp-132 Hrvatska, Croatia mpaclik@yahoo.com +385912990112
S.C.A.E. S.p.A. Via Alessandro Volta, 6 – 20090 Segrate (MI) Tel. +39 02 26930.1 Fax +39 02 26930.310 Skype LucchiniE.scae.net LucchiniE@scae.net www.scae.net

Western Europe

MAGSYS 1 place de la libération 64200 BIARRITZ jm.coutellier@magsys.net +33 (0)5 24 33 00 16
Global Traffic Service GmbH & Co Contact: Christof Herlich Meisenweg 17 50171 Kerpen Germany herrlich@globaltrafficservice.de +49 2237 9799950
GLOBAL

Sensor Installation

The NiteStar DMI supports 3 different methods of vehicle integration. The best method depends on a number of factors including vehicle type, vehicle age, application and usage.

SS-10 Vehicle Wiring

Select the year, make, model, and engine of your vehicle to display the wire colors and locations.If your vehicle is not listed at first, try another make (for example Dodge instead of Chrysler). If your vehicle isn’t listed, or you need more information, please contact:

Technical Support
Toll-free: 877-257-7755
Support@mhcorbin.com

Sensor installation is covered in detail by the MH Corbin SS-10 Electronic Interface Installation Guide

Year
Make
Model
Engine (L)

DISCLAIMER: MH Corbin SS-10 electronic interface adapters are sold with the understanding that they will be installed by a professional installer who has the required expertise and supporting documentation such as Mitchell or Motor electrical service manuals or equivalent. Any documentation or information provided by M H Corbin is a general guideline for reference and is supplied without warranty or liability of any kind. Since the conditions or methods of installation, operation, use and maintenance of this equipment are beyond its’ control, M H Corbin does not assume responsibility and expressly disclaims liability for loss, damage, or expense of any kind arising out of or in any way connected with any installation, operation, or maintenance of this sensor. The user who attempts to install the electronic interface adapter assumes all responsibility for problems caused by incorrect or improper installation.

SS-10 Vehicle Wiring Guide

SS10 InTERFACE

Works with most vehicles that are equipped with non-mechanical transmission sensors.
  • Amplifies pulses from the vehicle’s speed sensor
  • Supplies the most accurately computed traveled distances

OBD-II Adapter

Works with vehicles with an OBDII port without the need to hook up any additional wiring to the vehicle.
  • Can detect when the ignition is turned on or off
  • Can measure traveled distances
    to within +/- 1 ft.

Proximity Sensor

For vehicles that don’t have wheel speed sensors or the location of those signals is not known.
  • Installs on the vehicle’s wheels, brakes or trans
  • Supplies accurately computed  traveled distances

  • Power
  • 9 to 16VDC, negative ground 90mA @12V
  • Display
  • LCD – 3 brightness settings 6-digit distance, 4-digit interval, 3-digit speed
  • Indicators
  • Up/Down arrow, AEC, Code, Mark, Count, Hold, Display Hold, Calibrate
  • Speed Sensor
  • SS10, OBDII, or GPS
  • Keypad
  • LED – 3 brightness levels, 15 key touch-tell
  • Speed
  • 0 to 199 (kph, mph, fps)
  • Distance Conversion
  • Feet, Miles, Kilometers
  • Materials Calculated
  • Area, volume, tonnage, cost
  • Interval Counts
  • Elapsed distance from last mark, Begin/ end accumulation
  • Dimensions
  • 7.5 x 2.22 x .88 in. (19 x 5.7 x 2.2 cm)
  • GPS Receiver
  • WAAS enabled (NS60)
  • GPS Accuracy
  • +/- 6 ft.
  • Resolution
  • 1 foot (1 meter)
  • Calibration
  • Four vehicle memory
  • Pre Distance
  • Capable of starting at a known distance
  • Output Pulse
  • 0 to 5 VDC (low going high)
  • Error Correction
  • Compensates for sensor error due to vehicle dynamic motion
  • Output Channel
  • One 0 to 5 VDC digital
  • Input Channel
  • One 8-bit 0 to 5 VDC analog, One 0 to 5 VDC digital
  • Communications
  • RS232 in/out (NS60), selectable baud rate (300-600-1200-2400-4800-9600)
  • Memory
  • 0 to 99 locations, NS60 – Unlimited, 20 preset plain language events
Select the year, make, model, and engine of your vehicle to display the wire colors and locations.If your vehicle is not listed at first, try another make (for example Dodge instead of Chrysler). If your vehicle isn’t listed, or you need more information, please contact:

Technical Support
Toll-free: 877-257-7755
Support@mhcorbin.com

Sensor installation is covered in detail by the MH Corbin SS-10 Electronic Interface Installation Guide

Year
Make
Model
Engine (L)

DISCLAIMER: MH Corbin SS-10 electronic interface adapters are sold with the understanding that they will be installed by a professional installer who has the required expertise and supporting documentation such as Mitchell or Motor electrical service manuals or equivalent. Any documentation or information provided by M H Corbin is a general guideline for reference and is supplied without warranty or liability of any kind. Since the conditions or methods of installation, operation, use and maintenance of this equipment are beyond its’ control, M H Corbin does not assume responsibility and expressly disclaims liability for loss, damage, or expense of any kind arising out of or in any way connected with any installation, operation, or maintenance of this sensor. The user who attempts to install the electronic interface adapter assumes all responsibility for problems caused by incorrect or improper installation.

Where to Buy


Distributor Map - DMI
USA

Americas

Canada

Automated Traffic Data Dino Caruso 905-331-2438 dino.caruso@gmail.com http://www.automatedtrafficdata.com
Automated Traffic Data Dino Caruso 905-331-2438 dino.caruso@gmail.com http://www.automatedtrafficdata.com
Automated Traffic Data Dino Caruso 905-331-2438 dino.caruso@gmail.com http://www.automatedtrafficdata.com
Automated Traffic Data Dino Caruso 905-331-2438 dino.caruso@gmail.com http://www.automatedtrafficdata.com
Automated Traffic Data Dino Caruso 905-331-2438 dino.caruso@gmail.com http://www.automatedtrafficdata.com

Latin America

Ecuador
Sistemas Tecnológicos Cia. Ltda.
Diego Alcocer
593 2 6043210
dalcocer@sistemastecnologicos.com.ec
http://sistemastecnologicos.com.ec

Europe

Eastern Europe

Poland
FUSiT SYGNAŁY S.A.
ul. Sygnały 62
Rybnik
Tel. 48324218431
marketing@sygnaly.com.pl
www.sygnaly.com.pl

Southern Europe

Selekta Prima D.O.O Contact: Miroslav Paclik I. Trnava 49 10040 Zagreb, pp-132 Hrvatska, Croatia mpaclik@yahoo.com +385912990112
S.C.A.E. S.p.A. Via Alessandro Volta, 6 – 20090 Segrate (MI) Tel. +39 02 26930.1 Fax +39 02 26930.310 Skype LucchiniE.scae.net LucchiniE@scae.net www.scae.net

Western Europe

MAGSYS 1 place de la libération 64200 BIARRITZ jm.coutellier@magsys.net +33 (0)5 24 33 00 16
Global Traffic Service GmbH & Co Contact: Christof Herlich Meisenweg 17 50171 Kerpen Germany herrlich@globaltrafficservice.de +49 2237 9799950
GLOBAL

Technical Support

US Toll-Free: 800-380-1718
+1 (614) 873-5216

  • :
Contact Support

If you are not able to successfully troubleshoot and would like to return a product to M. H. Corbin for service, please contact us for an RMA (Return Materials Authorization) Number.