BlackMax GPS Synchronizer Module

The GPS1 GPS Synchronizer Module from MH Corbin employs a highly accurate GPS signal to provide a very precise transmitter frequency. This allows multiple HAR stations, with overlapping broadcast signals to synchronously broadcast the same audio message with superior sound quality.

The combined coverage area is limited only by the number of HARs in the network, and listeners moving through the network will hear the same message as if it were being generated from a single transmitter.

Quick Facts

Allows extension of broadcast coverage over large areas with multiple HAR systems
GPS antenna and cable included
Suitable for permanent or portable systems

Capabilities

SYNCHRONIZES BROADCASTS FOR MULTIPLE HAR SYSTEMS WITH OVERLAPPING SIGNALS

Front panel adjustment for fine tuning the RF phase angle
Modular design provides easy access and maintenance

Technical Specifications

Interface, Port Data

Type	DB9 9600 baud serial port
RF Phase Angle Adjustment	0 – 360 degrees in 1 degree increments
LEDs	Power, GPS 10 MHz, GPS 1 Hz, HAR Transmitter Lock

Environmental Data

Dimensions	10.3” (h) x 3.2” (w) x 9.2” (d
Power Requirements	10 to 14 VDC at less than 2A
Operating Temperature	-40° C to +85° C
Storage Temperature	-40° C to +85° C
Humidity	20%-95% RH, non-condensing